AR PARTS

PISTOL PARTS





Home > Reloading > 2-SET DIES
Sort By:
Page of 2
RCBS - Full Length Die Set .218 BEE - 10001
RCBS - Full Length Die Set .218 BEE - 10001
List Price: $45.45
OUR PRICE: $34.99
Sale Price: $19.99
Savings: $25.46

RCBS has been making some of the best reloading equipment for over 60 years. Their 2-Die sets are known in many reloading circles for their high-quality. Each 2-Die Set includes a full length sizer die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The seater die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately.R
more info
RCBS - 2-Die Set 243 Winchester Super Short Magnum (WSSM) - 11601
RCBS - 2-Die Set 243 Winchester Super Short Magnum (WSSM) - 11601
List Price: $45.45
OUR PRICE: $34.99

more info
RCBS - 2-Die Set 25 Winchester Super Short Magnum (WSSM) - 12401
RCBS - 2-Die Set 25 Winchester Super Short Magnum (WSSM) - 12401
List Price: $45.45
OUR PRICE: $34.99

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. more info
RCBS - 2-Die Set 257 Roberts - 12501
RCBS - 2-Die Set 257 Roberts - 12501
List Price: $45.45
OUR PRICE: $34.99

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. more info
RCBS - 2-Die Set 270 Weatherby Magnum - 13401
RCBS - 2-Die Set 270 Weatherby Magnum - 13401
List Price: $45.45
OUR PRICE: $34.99

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. more info
RCBS - 2-Die Set 280 Remington, 7mm Express - 14001
RCBS - 2-Die Set 280 Remington, 7mm Express - 14001
List Price: $45.45
OUR PRICE: $34.99

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. more info
RCBS - 2-Die Set 300 Remington Ultra Magnum - 17601
RCBS - 2-Die Set 300 Remington Ultra Magnum - 17601
List Price: $45.45
OUR PRICE: $34.99

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. more info
RCBS - 2-Die Set 30-378 Weatherby Magnum - 29501
RCBS - 2-Die Set 30-378 Weatherby Magnum - 29501
List Price: $45.45
OUR PRICE: $34.99

more info
RCBS - 2-Die Set 7mm Remington Short Action Ultra Magnum (RSAUM) - 31101
RCBS - 2-Die Set 7mm Remington Short Action Ultra Magnum (RSAUM) - 31101
List Price: $45.45
OUR PRICE: $34.99

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. more info
RCBS - 2-Die Set 325 Winchester Short Magnum (WSM) - 31601
RCBS - 2-Die Set 325 Winchester Short Magnum (WSM) - 31601
List Price: $45.45
OUR PRICE: $34.99

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated. more info
   
 
It all started with a great idea and a little hard work. Today we're proud to provide quality products direct to your doorstep through an experience you'll enjoy. And most of all, we hope you'll enjoy the products as much as we do. Call or email us today to let us know what you think. We'd love to hear from you!